Check this:
http://www.sinclairintl.com/reloadin...prod32925.aspx
there's a video there too. Take a FL sized case, trim it .100" shorter than minimum spec. Insert tool into case then into chamber. Close bolt. Extract and measure.
Check this:
http://www.sinclairintl.com/reloadin...prod32925.aspx
there's a video there too. Take a FL sized case, trim it .100" shorter than minimum spec. Insert tool into case then into chamber. Close bolt. Extract and measure.
[COLOR=#ff0000]Hello to all you nice folks at NSA :)[/COLOR]
Bookmarks