Quote Originally Posted by memilanuk View Post
Okay... seriously. This is about to drive me to drinkin'
Well, at least that's one bright spot.

The last one that was giving a problem, a 14 in 7-08, I installed the new style ejector , a new spring and a new extractor /140 ball and its been 100% trouble free since. The 250 Imp's ejection was always lazy. The brass cleared the port ..barely. I Installed the same parts and increased the ejector protrusion a bit. Now it spits them out, not hard enough to knock the phone out of Maw's hand when she's watching QVC, but out never less.

Anolther tidbit. Make sure the extractor is "Homing", returning to the same position every time. Make a fine line with a sharp pencil or scribe across it and the bolt nose then gently push it outward about the same amount it moves when jumping the rim of a case. The marks should realign when you let it go. If not than you'll have to find out why.

Its the best I can help!

Bill