I have that exact setup, model 110 30-06, and while I ordered the scope through Vortex's military program, I also purchased a set of their factory paired and machined high rings seen here. I wont be home until the 11th when my orders end for me to measure them, but I can tell you there is plenty of room for scope caps. I made several measurments to find my centerline of barrel to centerline of scope height, which in my ballistics program is 2.295" and can be seen with the old barrel here http://www.savageshooters.com/showth...ie-Area)-PICS!. So it seems as long as you can use the formula provided on XLR's website for scope clearance, you will have to solve for X in the scope ring height to determine your minimum ring height for any other brand, but anything 1.26" or 32mm and up will suffice.
Bookmarks