Search GunBroker and GunsAmerica for that model and see if you can find one with pictures of the serial number. That's probably the easiest way other than google images.
ETA: try G473369
I want to order the laminated stock that came on the LEFT HAND Savage 12 Varmint Low Profile. It was set up with a blind magazine, and the 4.4" short action. I tried calling Savage, but didn't have any luck. The parts fellow I spoke to says he cannot find it in their old catalogs (it is discontinued) but if I had a serial number they could assist me.
Well, that would be great, but I don't own one, just want the stock! I neglected to ask, but might it be possible to find it with the item stock number Savage assigns to each of their rifles?
The stock is attractive for any number of reasons. It is laminated, has pillars, no cheekpiece, and most importantly, closely resembles the old Winchester 70 Marksman stock. It would make a great all-around rifle stock for varminting, bench work, even prone with some adjustments.
If anyone could provide a serial number of one of theirs, it would be tremendously useful. Using that, I could find the part number for that exact stock. In future, anyone wanting that stock would have the correct part number.
Anyone?
Search GunBroker and GunsAmerica for that model and see if you can find one with pictures of the serial number. That's probably the easiest way other than google images.
ETA: try G473369
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Savage shows it out of stock.
Numrich has it though. https://www.gunpartscorp.com/Manufac...2VLP-33805.htm
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
that one also says 4.275" spacing
Another alternative might be for the owner of one of these LEFT HAND rifles to call Savage, give the serial number, and ascertain the part number of the stock in question.
Worth a few beers and lunch if you are in Walla Walla!
Apparently you missed the serial number I posted. Let me make it a little clearer.
STOCK ASSY LH SH BROWN LAM LOW PROFILE - P/N: 105920 $221.00
This component is currently out of stock.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
I did, I misunderstood completely. My many thanks for your efforts.
Edited to add that lunch is waiting for you!
Awesome! I prefer my beer dark :)
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
I bought the right hand version from Numrich. Intend to plug the front screw hole and drill for the correct spacing. I will also block the mag well and fit a middle pillar, along with filling in the RH bolt notch and cutting a new LH notch.
HOWEVER!
Effie emailed me today, and it seems I might be able to get them to cut a LH VLP stock. It is a bit more money than buying the right-hander from Numrich (about another 100 bucks) but that still pales in comparison to picking up a Russo, McMillan, etc. so tomorrow I will order THAT as well. I may leave the RH stock alone to build "The Boy" a rifle, but one way or another there will be a lefty version here in short order!
Hotolds442, there are two breweries here in Walla Walla, both of which produce some excellent dark beers. One of them has a killer sandwich selection, and even though my cholesterol says no-no (according to my doc) I am IN next time you are in town. No cholesterol in beer, right?
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Pm sent, Mike.
Oz never gave nothing to the Tin Man, that he didn't already have.
Bookmarks