I have a couple of them on my f class rifles, I found it worked ok on my 6br but it didn't track all that well, the bottom of the buttstock tapers down from the pistol grip to the back of the stock.
The tracking issue was magnified with the extra recoil of my 6.5-284 and it also started trying to torque over in the bags.
I ended up making the underneath of the buttstock parallel and setup an offset plate on the front of it, it tracks really well now and doesn't torque over
The other issue I had is that with the 30" straight taper factory barrel, it was very light in the rear, I drilled holes under the butt pad and added about 2lbs of lead to balance it better.
There are properly a lot better stocks available for them, but our options here in New Zealand are pretty limited as most of the stock makers in the us won't ship out here
Bookmarks