semi gloss engine enamel has covered a few
Can a person rattle can a rifle barrel and action ? If so what is the technique ?
semi gloss engine enamel has covered a few
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Rustoleum in black or brown is common in the bush up here. Not pretty, but practical. Personally, I'd rather use Duracoat or a similar product, but that isn't always easy to find.
All you really need to do to prep is make sure its dry.
Nate
This is an example of a rattle can job:
[img width=600 height=450]http://i122.photobucket.com/albums/o276/Apache5000/DSC00009.jpg[/img]
The whole thing was done with rattle cans.
Camo Krylon Fusion and black (Krylon ?) webbing spray. Several coats of satin clear coat for finish. Stands up to abuse OK....easy to repair when needed.
The best part about Krylon is, if you change your mind and want it back original, all it takes is lacquer thinner and some rags.
Never kick a fresh turd on a hot day- Harry Truman
Looks really good.
Bookmarks