Results 1 to 7 of 7

Thread: Need help identifying this Cocking Piece Pin

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-07-2014, 08:15 PM #3
    thomae
    Guest
    Quote Originally Posted by Werewolf View Post
    The pin on the left is for an older 10 or 110 bolt that is the same diameter for its full length. Newer bolts have a smaller diameter shank at the cocking ramp and the extra thickness on the new pin takes up the slack in the action. I don't think they are interchangeable.
    Please look closely. Neither of the bolts in the photo are the same diameter the whole length of the shaft.

    Edit: Dang, whenever I don't pay attention, I don't say what I mean. What I meant is that the shaft of the cocking piece pins is not the same diameter...
    Last edited by thomae; 02-07-2014 at 11:24 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Cocking piece pin tilted in bolt
    By RWL1 in forum 110-Series Rifles
    Replies: 26
    Last Post: 09-25-2018, 05:56 PM
  2. Cocking piece position in notcch
    By memilanuk in forum 110-Series Rifles
    Replies: 7
    Last Post: 03-23-2017, 01:13 AM
  3. Cocking Piece Pin Help
    By shoalwater in forum 110-Series Rifles
    Replies: 2
    Last Post: 03-31-2014, 07:14 PM
  4. Cocking piece pin
    By 03mossy in forum 110-Series Rifles
    Replies: 13
    Last Post: 07-21-2013, 12:45 PM
  5. cocking piece pin
    By flatshooter in forum 110-Series Rifles
    Replies: 5
    Last Post: 07-20-2010, 04:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules