Sometimes you can get "screwed" with "bolts".
Has anyone ever actually counted how many wrong ways there are to reassemble a Savage bolt? OR How many dumb S.C. rednecks it takes to reassemble a Savage bolt?......Just 1 if he doesn't give up or throw the parts _______(enter your favorite place here) scpaul
Sometimes you can get "screwed" with "bolts".
Savage bolts are easy.
Just a few things to remember...
Like -
a) un-cock it before disassembly.
b) Spring tension. Not too tight, not too lose...
c) Don't forget the sleeve for the cocking button thingie.
d) Bolt handle goes on 2 ways. Pick the right one.
e) firing pin protrusion.
f) Re-cock the **** thing before trying to insert into action.
g) Make sure bolt screw is tight.
I) Everything else.....
Or, so I'm told.
'Scuse me while I whip this out...!
I cant even get the screw loose. I just want to change the handle dangit.
put your allen wrench in the BAS set in on the floor then stand on it
drybean
is it a bad idea to try and break the BAS loose with the bolt in the gun to hold it?
yes, you might break the bolt head retaining pin
drybean
Did you get it broke free yet???
Willing to give back for what the sport has done for me!
Bookmarks