Quote Originally Posted by plinkin View Post
I have posted this on other places:

Not that is NOT the problem. Like he said every B.Mag the stock orients to the left.

When you torque the front action screw 1st then the rear action screw it twists the action (to the left) or the stock (to the right).

If you snug or partially torque the front screw to say 25in/lbs then the rear to 50in/lbs (the actual spec) then the front to 50in/lbs it doesn't do this or it does it very very little.

I do not know if it effects POI I just know this procedure changes how the stock appears to be warped.
i attempted that. No change