Yes, easier than you think too. A flathead, Phillips, a T15(I think, it's the standard driver head for any Savage action screws), and a 7/16 socket/wrench
1) Unload, safety ON. Lock bolt OPEN.
2) Remove the two bolts at the mag well, the bottom metal stays with them. Set the stock aside.
3) Remove the screw behind the trigger, one in front of it. Remove the one from the mag well(Phillips head)
4) Trigger assembly and mag well drop away, you should be left with one more screw that holds a bracket that holds your barrel to the action. You can use a 7/16 socket/wrench for this. Remove and pull the barrel straight out.
5) You can unlock the bolt and it will slide right out to clean it.
There should be a total of 6 screw/bolts and the gun will be disassembled.
Bookmarks