PPU is Privi
Just got a modified case for my Hornady OAL gauge off ebay for the 6.5x55. All the other ones I have are Hornady headstamped,this one is stamped PPU. Are these the same case or did somebody pull a fast one?
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
PPU is Privi
I'm thinking Hornady doesn't load the swede so they buy the brass elsewhere?
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
It was in the regular Hornady packaging,that's what confused me.
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Then I'd say post #4 holds the answer.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Either way as long as it is threaded properly and the neck opened up a little so the bullet will slide with slight resistance it will work. I make my own on a $35 drill press. Just need the right drill bit, tap and neck expander. I highly suspect a lot of them on ebay are homemade. Especially the hard to fine ones.
Floyd
Bookmarks