Getting OEM/factory parts of any kind has been a huge problem for everyone (vendors) for the past year or so due to Savage's growth and increased sales volume and the sheer insanity in the US arms market (hard to get parts cast when the casting companies are swamped with massive orders for AR receivers). This is also why SSS's Tactical bolt handles have been scarce in recent months.
As for OEM/factory parts vendors the usual suspects are your best bet: Brownells, Midway USA, Numricks, NSS and SSS. I wouldn't spend the extra $$ for the PT&G bolt head myself as I've yet to see one that's better than a factory bolt head. Only way I'd go that route is if I couldn't source a factory one from somewhere else.
You'll need the bolt head and the ejector parts, the extractor parts you can pull from your current bolt head to save a few bucks.
One area it seems you are a little confused is in regards to the barrel shank size. You state your action is a large shank, yet you specify a standard (small) barrel and barrel nut. If the action is a large shank then your new barrel and nut will also have to be large shank to match.
As for the rest, it looks like you've got it covered. Only oversight might be a competition recoil lug and possibly different length action screws for the new stock.
Bookmarks