I think you will have to change your sear. I assume the "set up" includes the stock.
I have a 110 with top bolt release and a blind mag. I have located a detachable mag setup from a 116 but it was with a bottom bolt release. Will it work on my 110?
I think you will have to change your sear. I assume the "set up" includes the stock.
Yes it comes with the stock too.
Then I think the sear is your only hurdle.
OK. Thanks
The sear has nothing to do with the DBM. Use your original top bolt release. The only thing you will have to do is add shim washer under your trigger guard to bring it up to height.
"As long as there's lead in the air....there's still hope.."
Thanks sharpshooter. That sounds a lot better.
Sorry, I assumed you were using the bottom bolt release.
Rp12. No worries. I should have been more clear in my original post.
The sears will not interchange on the two, regardless.
"As long as there's lead in the air....there's still hope.."
Bookmarks