OOPPSIE on my part. My dumba$$ forgot about the action screw spacing on Striker action are different.
Question: How is an after market trigger (Timney or Basix) attached to the action when you build a rear gripped Striker? Any photo's of close up shots of the attachement would be cool too! I have.thought about this and have.just never come up with a good answer, so I thought I would ask.
Thanks in advance,
Rupe
You need to replace both the trigger and the mag box since they are sort of tied together. If you make the gun a single shot and put a plug in the mag well, then the trigger will attach just like a standard one.
Andrew
Bookmarks