The head seperation makes things easier.
Take the decapper/expander out of the die. Put the die in a vice so you can get at the case (or whats left of it). Put some kroil or penentrating oil into the die. Let it sit for a while. Then get 1/4" all thread and a tap that has the same pitch as the all thread. Lightly put the all thread in, DO NOT go all the way in with it, you just want to get one thread, twist the all thread in the thread until its tight. Put a washer and a nut down on the all thread, and tighten until the case pops out.
Bookmarks