Northland shooters supply
4D
Shilen
Sin Arms
I know I am missing something.
You might put something in the Want To Buy ads or view the Classifieds. I think there was one over there.
I have a older Savage tactical 110fp in 308. Im not sure if it is small or large shank?
Last edited by scvpiper; 11-18-2013 at 01:05 AM.
Northland shooters supply
4D
Shilen
Sin Arms
I know I am missing something.
You might put something in the Want To Buy ads or view the Classifieds. I think there was one over there.
no this is not a WTB add Im just not sure of the shank size the serial # starts a F if that helps
Everyone I've ever seen is a small shank
Not to start a discussion or argument, but what's wrong with the fp barrel. I've owned 4 fp's (none in 308), I've had vlp's, lrp's and fp's and pretty much everything savage has to offer and for some odd reason those fp's would just plain shoot.
Ohh its a shooter just thinking of trying another caliber
This is from McGowens site :
There are several ways to identify your current Savage shank. Target actions use the large nut and will have the word "Target" on the action. There are also 3 screws in the receiver for a target shank. The barrel nut on the large shank is shorter in length than the nut used on a standard shank. Savage Thread Specs:
Target Savage - 1.115-20 TPI (1.400 Long +/- .020)
Standard Savage - 1.060-20 TPI (1.600 Long +/- .020)
Large Savage - 1.115-20 TPI (1.500 Long +/- .020)
It's a standard (small) shank.
I don't know what Savage has done, but I received a "Target" Action 3 months ago and their is not one word or mark stamped on the Action. My older ones are loaded with info. (?)Target actions use the large nut and will have the word "Target" on the action.
[B][SIZE=3]Dennis[/SIZE][/B]
Bookmarks