308
How does the gun sit in the stock.I've read about the barrel rubbing on one side,out of line with it.
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Here's a 300 WSM that I had for a while. Sold it to a buddy who wanted it more than I did.
Here's an older picture of my 375 BME. I switched scopes and put a Mk 4 8.5-25x50 M5 TMR on there and added a cheek piece since then. This thing practically qualifies as a "hard target" rifle. 350gr Matchkings at 3050 fps!
Andrew
That last one is beastly.
Sent from my HTCEVOV4G using Tapatalk 2
How far have you taken it out to?
Sent from my HTCEVOV4G using Tapatalk 2
I hate you so much right now!
Man, I wish I could get me an XLR!!
Nice rig.
Here's my new 260AI build in the foreground and my buddy Bob shooting my 260 Rem in the background. Today was the first day I shot the 260AI and I was just fire forming 260AI brass from 260 Rem brass (Everything worked flawlessly). The 260 AI is a McGowen, 28", 1:8 twist, Shilen #7 profile barrel in a Manners T5 stock with SWFA SS 12X fixed scope (same stock/scope as the McGowen 24" 260 Rem rifle in the background).
Other than barrel length the rifles appear identical to the untrained eye which is my strategy for my wife not noticing that the number of rifles keeps increasing. :)
We are a sneaky lot aren't we?!Other than barrel length the rifles appear identical to the untrained eye which is my strategy for my wife not noticing that the number of rifles keeps increasing. :)
Here's what the 260 Rem brass looks like after fire forming in the 260AI chamber versus the normal 260 Rem brass. My plan is to fire form brass in the 260AI and then full length resize from that point on.
a little update, just took her home from gunsmith. Took about 4" off and installed AU Northstar supressor. Next big thing will be what kind of optics she's getting :S I'm thinking Vortex razor/viper, Zeiss, S&B, Steiner, Hensoldt.. So many scopes, so little money
Wowwwwww!!!!!!!
Why would you full length an AI case? Doesn't that sort of defeat the purpose of AI'ing to begin with?
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Well it looks i have been very good this year since i got my first Christmas present and its not even Christmas Eve :D
Came from UK eBay. Says it fits both center and stagger feed, but it'll have to wait until hunting season ends to see if it need any fitting done etc. Till next time
ANY AI CARTRIDGE should only be neck sized imho
maybe bump back .0001 every 5yh or 6th firing ...and then only if bolt closing becomes stiffer
.0001 or .001
0.001 or one thousandth
sorry I put the point . in the wrong column
Hey Onewolf,
What Stock pack is that on those tasty little Manners?
Bookmarks