Yes. The only difference between those two parts is the one has a "dogleg" to shorten the bolt cycle and the other one does not. It will work fine.
Right now I have this front bolt buffer on my model 11
http://www.midwayusa.com/product/956...tainless-steel
But I would like to use this one that is made for the 110
http://www.midwayusa.com/product/128...tainless-steel
Does anybody know if they are interchangeable?
Yes. The only difference between those two parts is the one has a "dogleg" to shorten the bolt cycle and the other one does not. It will work fine.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
To add to that, it may not work the other way around. Shortening the stroke may cause feeding issues depending on the caliber and magazine your rifle is set up for.
Just thought I would add that for anyone else that reads this thread later.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Perfect that is the exact answer I was hoping for. I bought a XLR Chassis and it uses AICS mags but the bolt will not cycle back far enough to grab the round. With the 110 baffle it will definitely cycle far enough to work right.
Bookmarks