Nice rifle. By missfiring I am thinking failure to fire. Can you take pictures of the primer end of the rounds that did not fire. We can do some CSI on the primers. Being a new rifle it might be a good idea to contact savage but there are some things to look at. you might be able to fix some of them. Just for starters pull the trigger all of the way back, push the bolt release down. It should be smooth till it stops. Next, dry fire the rifle (unloaded). The sound you here should be a clear "Whack". Not an enemic sound. This is the firing pin going home. It needs speed. If it is not hitting hard, you may want to try and lubricate the internals of the bolt. Hopefully some others will chime in with more simple things to consider but for me those two stand out at the moment.
Bookmarks