factory 3 screw
This is the first time having a stock off a 110/10 and I just want to know if it's stock or not and how to adjust it. Also if it's aftermarket woo makes it. Thanks in advance.
factory 3 screw
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Factory 4 screw....
"As long as there's lead in the air....there's still hope.."
How do I adjust it
Go here to learn how to adjust it..
http://www.savageshooters.com/conten...ent-Procedures
NRA Endowment Member
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
There you go. I would add to keep a decent arch in the trigger return spring. A flat one like in the pic can be iffy and lead to problems. I usually use a lighter wire (.043) from the hardware store and keep a decent arch in it with the pull adjustment screw.
A good wife and a steady job has ruined many a great hunter.
The .043 is better than a .040. Im not a big fan of the .040 piano wire I like the factory tempered wire myself.
thanks a lot guys
Bookmarks