just a good fit, It will come off. have a vice with wood blocks or something you can put the bolt tube in supported by the handle and tap on the loose screw knocking the tube out of the handle?
I am trying to remove the teardrop bolt handle on a 1979 "J " series and have dis-assembled the bolt but cannot get the handle to come off. I am the original owner and this gun has no rust anywhere. Removed the barrel yesterday without any problems. What's the trick with the handle?
just a good fit, It will come off. have a vice with wood blocks or something you can put the bolt tube in supported by the handle and tap on the loose screw knocking the tube out of the handle?
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks