Originally Posted by
jpdown
Since you have a Savage LA, you can make any of the older Savage SF and aftermarket stocks work. The stock hole spacing is the same for the old LA staggerfeed and the newer LA centerfeed. You will have to find a way to hold the CF magazine box in place since the blind stock magazine well is usually oversized in a SF stock. Bedding the magazine box in the stock well will work. I place 4 small balls of plumbers epoxy putty in each corner of the stock well. Place a business card between the bolt and magazine lips and tape the box in the correct position to the action. Then attach the action to the stock pressing the magazine box into the soft putty. Don't forget to use release agent. Remove after about 10 minutes and trim the excess putty before is completely sets. So a Choate, B&C or SF aftermarket stock are viable options.
You can purchase the DBM bottom metal frame and magazine bottom cap. The bottom cap snaps onto your current magazine box with follower. Sharp Shooter Supply (SSS) has the parts listed on thier web site. SSS also make unfinished stocks with the CF DBM cut-out for your action. You can purchase the bottom metal parts from Savage Arms Parts at an inflated price. Stockade Gunstocks may also stock these parts.
Boyd's now offers 3 stock styles in walnut or laminated with the DBM cut-out for a Savage LA CF. Give Kevin a call at Stockade, I know he makes composite CF blind magazine stocks for the Savage. But not sure if he offers stocks with the CF drop box magazine cut-out. Another option is to purchase a Savage factory CF stock with the DBM cut-out. In that case, I would look for a LA Accustock.
If you are a paid member on this site, you can view the classified's. If patient and watchful you can often pick up the parts other members are selling for a fair price. You could also make a Want-to-buy (WTB) post to see if a member is willing to sell you the spare parts you need.
Bookmarks