Purty hard to beat the Forster BR seater...one of the best seaters out there...
I use a Lee collet neck die.....
Forster or Redding FL die....can't remember........
???
I am in the process of building a .260 Rem using my Savage 111 .30-06 as a base. It is a center feed stlye long action.
I was looking to pick up a Redding Neck Sizer die seen here. http://www.midwayusa.com/viewProduct...tNumber=521137
I have one for my 700 .308 and it does a good job.
Do any of you think I would have trouble loading the rounds in the center feed mag if I just size the necks?
Any other tips or tricks for loading the .260 Rem?
Purty hard to beat the Forster BR seater...one of the best seaters out there...
I use a Lee collet neck die.....
Forster or Redding FL die....can't remember........
???
S/shot Savage & heavy Pac Nor's rock !! 'JM' Marlin lever gun nut !
You wont have feeding trouble but you may have a hard time closing the bolt on them if you don't Full Length size every now and then. I used Redding Full Length and Neck Die and a Redding Comp Seater in my .260. The 243 I just built I'll use a Forester Ultra seater and Redding F/L and Neck Dies. I'd try to buy you're dies in a set they are cheaper that way.
http://www.midwayusa.com/viewProduct...tNumber=110018
Bookmarks