Results 1 to 19 of 19

Thread: Problem during load testing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member DanSavage's Avatar
    Join Date
    Apr 2010
    Location
    Tri-County, N.Y.
    Age
    47
    Posts
    783
    jsand, if all of the groups are consistently larger than expected, try seating the bullet further out toward the lands. When shooting for accuracy with a bolt gun, you'll want to know the point at which the bullet will touch the lands when a round is in the chamber. I usually start load development at .015 off the lands.

    Also as a side note, I really don't think you got the barrel too hot, in the match's I shoot in were shooting 25 rounds in 15 minutes, on 90 degree days. I can touch the barrels after a string like that but I can't keep my hand there for more than a couple seconds. No one is losing any accuracy over it but POI may walk a little bit.

  2. #2
    jsand70
    Guest
    Okay, but how do you determine where the lands start?

Similar Threads

  1. .223 Load Testing for Model 11 V/T
    By concretus in forum Ammunition & Reloading
    Replies: 3
    Last Post: 10-09-2015, 02:16 AM
  2. Load testing distances
    By pepper savage 111 in forum Ammunition & Reloading
    Replies: 15
    Last Post: 06-27-2015, 06:09 AM
  3. Any value in testing new load…..
    By Texas10 in forum Ammunition & Reloading
    Replies: 11
    Last Post: 01-24-2015, 01:15 AM
  4. O.A.L while load testing ?
    By acemisser in forum Ammunition & Reloading
    Replies: 17
    Last Post: 12-20-2012, 12:23 PM
  5. What distance do you do your load testing,etc
    By acemisser in forum Ammunition & Reloading
    Replies: 24
    Last Post: 11-04-2012, 11:32 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •