Are there 3 or 4 screws on the bottom of the stock? You'll have two going through the trigger guard, one about 4.5 inches forward of the trigger guard, and possibly a 4th a little further forward than that. If you have the 4th screw you have the 1st version of the AccuStock. Basically after the first 6 months or so of production Savage realized that the wedge offered no real benefit so they deep 6'd it.
As for the cocking indicator, there are actually two. The first is at the rear of the bolt. When the firing pin is uncocked the rear assembly screw on the bolt assembly will have a hole in it to insert a hex wrench to remove it. When the firing pin is cocked the indicator will protrude back through that hole to where it's flush or a little past flush with the back of the assembly screw.
The second is a small flag that's part of the sear which will pop up from behind the stock on the right side of the action just forward of the bolt handle.
Bookmarks