Results 1 to 15 of 15

Thread: 260 rem. 30 degree improved ? Fireform

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-28-2013, 01:52 PM #12
    chukarmandoo
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    May 2012
    Location
    Portlandia, Or.
    Posts
    428
    Quote Originally Posted by BillPa View Post
    No problem.

    Oh BTW, DO NOT resize the parent cartridge in your improved FL die otherwise you'll push the junction back to the post Improved location. Remember, the improved casehead to junction length will be .004-.006" shorter than the parents's. The most you want to do is fix up the necks if needed , fire them As-Is.

    Bill
    I don't. Thanks for the heads up.
    One more ? I haven't done this but was wondering, is it a no-no to fire form used brass?
    The reason I'm asking is, say I have standard 260 reloads and I'm out of the improved loads.
    Last edited by chukarmandoo; 05-28-2013 at 01:57 PM. Reason: more detail
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How do I headspace a 30 degree Swift?
    By 1911Nut in forum 110-Series Rifles
    Replies: 18
    Last Post: 11-18-2017, 01:37 PM
  2. Another way to fireform
    By psharon97 in forum Ammunition & Reloading
    Replies: 4
    Last Post: 09-18-2016, 09:23 PM
  3. Top mounted and 45 degree secondary sight for close range.
    By lrshooting in forum Optics
    Replies: 16
    Last Post: 10-03-2015, 06:18 PM
  4. Using once-fired brass to fireform for 223 AI
    By rdog52 in forum Ammunition & Reloading
    Replies: 5
    Last Post: 03-25-2013, 12:08 AM
  5. Why 11 degree crown angle?
    By thomae in forum 110-Series Rifles
    Replies: 9
    Last Post: 03-29-2012, 03:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules