Wow what kind of velocity i wonder. Looks like she likes it hot
The wind finally died down enough to get some load testing done. Here are my results with 4831SC. It definately got more accurate as I went up in grains. The last group was as high as I feel comfortable going, barely started to see some flow on the primers. This was out of a Savage LRP and all loads were .020 off of the lands. With 140 grain Nosler CC.
https://www.dropbox.com/s/f4dd8xuwo1...2012.43.37.jpg
Last edited by blt65; 05-29-2013 at 12:37 PM.
Wow what kind of velocity i wonder. Looks like she likes it hot
Honestly I completely forgot my chronograph. I will load up some more at 45.6, might drop down to 45.5 and this time I won't forget my chronograph. According to Quickloads it should be at 2828 fps, I have found Qiuckloads to be very accurate (within 50 fps) but we know real life is a totally different story. I will report back as soon as I can get some loaded and get back out. Might try this load with some SMK and AMAX's just to see what happens. I will keep everything consistant (load, .020 off the lands) etc. I'm just curious.
I got out today and averaged right around 2858 fps.
Bookmarks