I assume this is all based on the NEW .378 bolt head as well, correct?
My 223 build is based on 300 WSM action.
It did not have an extractor. I want to install an extractor so my question is what parts are needed?
My initial understanding is the following
Savage Arms Ejector Top Loading All Calibers http://www.midwayusa.com/product/117...g-all-calibers Savage Arms Ejector Retaining Pin Top Loading All Calibers http://www.midwayusa.com/product/782...g-all-calibers Savage Arms Ejector Spring Top Loading All Calibers http://www.midwayusa.com/product/194...g-all-calibers
I assume this is all based on the NEW .378 bolt head as well, correct?
All the parts you have listed are for the ejector, which is not a bad idea to have as spares
If you want the extractor parts you will need the extractor, detent ball and spring
Here are midway links
http://www.midwayusa.com/product/444...g-all-calibers
http://www.midwayusa.com/product/149...g-all-calibers
http://www.midwayusa.com/product/107...g-all-calibers
I hope this helps
Jack
Just noticed the title of the OP
The parts you have listed are what you need for the ejector
Jack
Changing from WSM to .223 you will also need a regular length firing pin. The WSM pins are longer.
Hmm. I title it ejector (which is what I need) and then I say extractor...
Sorry for the confusion
Bookmarks