From SSS site.....Tech updates. http://www.sharpshootersupply.com/
Hope this helpsIn 2003 Savage introduced their new ACCU-TRIGGER, and made some other changes to accommodate it. One of these changes was a newly designed safety assembly using a different detent spring. Because of this revision, a modification must be made to the Sharp Shooter Competition Trigger to fit inside the trigger bracket and clear the new detent spring. This modification is simply trimming the side plates with a grinder or belt sander to a 45 degree angle so it will not interfere with the new detent spring.
If you have a previous production version, this modification will be required for use on the new ACCU-TRIGGER models. It will also be necessary to adjust the over travel and safety engagement screws out further to contact the new safety.
Bill
Bookmarks