Cleaning the .17 Hornet M25

[JLShipley]

I've been using a Tipton one piece and find that cutting the patches small is the only way to do a good clean up job of getting the gunk out of the bore. The .17 brass brushes are not bad to get down the bore's with bore solvent...but a dry patch can be a bear.

I've been using Pro shot .17 Patches about 1" square , little cleaning/lube oil, first two patches, then dry one', when finished, end with a .17 mop. Brush, I've used a brush about 3 times, about ever 75 rounds.
How's your reloads going? What powders have you tried? I've used,H110,H4198,H355,Li/Gun
Jim