Reline the barrel?
I have a model 1899 TD in 22 hp which came to me from my great grandfather. It had been neglected and not in good shape. A gunsmith told me the bore was no good. Can this barrel be rebored so I can enjoy the old rifle some without a major pain relating to the magazine and chamber? I am thinking maybe 25-35 since the old 22hp was a modification to this cartridge.
Reline the barrel?
Reline the barrel or have a new one installed and go with a 219 Zipper perhaps?
219 Zipper is basically a 22HP that uses .224 bullets rather than the oddball .228 bullets of the 22HP.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Yes - it can be rebored. Redman's is the best http://www.redmansrifling.com/ in my experience but they cost $. Relining isn't an option with the high pressure cartridges. You could easily rebore to 25-35 and (probably) 30-30. Mad Dog will correct me if I am wrong on the cartridges working with the rotor.
Of course you will have big $ invested but a family piece is worth some money.
Ah, now I see what happened, I answered the same posts in rimfire.
Savage- "never say never".
Thanks for the advice. It is a slender barrel. I will look into getting it rebored to 25-35
How bout going to 6mm-30? lots of 6mm bullets available. The gunsmith I talked with told me to do the same with my 22HP. PO Ackely made one. its in Cartridges of the world. its a 30-30 case necked down. But if you don't handload, forget it. and go to the 25-35. Just another option.
Where would you find 25-35 brass?
"As long as there's lead in the air....there's still hope.."
Bookmarks