Quote Originally Posted by embalmer883 View Post
The one that I had done they didn't remove the thread tennon. A savage barrel at thr threads is 1.05 and a remington at the threads is 1.0625. not alot of difference but when you turn down the threads to the savage diameter it cleans them off. then when threaded for the savage your good to go! I had to do 0 chamber work.
I'm sorry but the difference between 1.05 & 1.0625 is only twelve thousands of an inch that will not clean off the remington threads
and if you did what you said all you did was cross thread the barrel.
in realty the savage threads are really 1.062x20 not 1.05x20