i had to taper the magpul adaper in front a little ,,,and it fits real nice and snug...i tried to get a nice line on it but i needed to make sure there were openings to fill the stock at the joint with epoxy.... it also has a 45 degree bolt hole inside that can be used to help secure the unit and the curve right where the stock has been cut shoud be a perfect line up for a 1/4 screw and bolt ...the opening at the bottom i think i can control the bolt to get it lined up but really the bolt may not be needed.... saw some great 1 way screws at home depot number tens i will use to help fortify the joint i did all this in 2 hrs (actual working time)bottomtop these holes will be filled and sanded with epoxy
Bookmarks