I have been looking for a replacement trigger guard for my 12FV stock. Mine is an accutrigger with round receiver front and back. EGW makes one but is is listed as for a flat back receiver. What is the difference since the ones listed at midway and brownells don't specify a difference. I am just wanting to get the gun together and would settle for a plastic or aluminum one. Any ideas?
I'm a firm believer in the theory that if it bleeds, I can kill it.
There are some minor differences in trigger gaurds that are available, mostly with the plastic ones and the bottom bolt release and 16/116 trap door release models. The trigger type and the afore mentioned issues as well as the stock design have an impact on fitment. Most of the time there arent any issues and often a small flatwasher of the 1/4" variety will help accomodate the problem.
http://www.midwayusa.com/product/119...cm_vc=wishList
This should be what you need
Better hurry as they do not stay in stock long
Hope this helps
Jack
Thanks, they were out earlier. The Midway product notification to inform me that it was back in stock came 7 hours after I saw your post and I saw your post 2 1/2 hours after you posted it! I got lucky and ordered one.
Last edited by xtratoy; 03-10-2013 at 10:42 AM.
Bookmarks