Many shooters that I know are having ejection problems with Savage bolt actions.My M12 LRPV just came back from the factory to correct that problem as well as extreme primer cratering.The Palama pro shop installed a new bolt nose,which cleared up 95% of the primer problem but the 10 rounds I fired for testing (factory Hornady .204),only 3 ejected.First I'll try a .040 detent ball,then adjust the ejector travel by lengthening the slot in the rear.(spring is fine),and if that doesn't fix it,I'll buy the custom extractor that Fred At SSS, sells.Seems Savage needs better quality control.Took me an extra week to return my gun,because the first bolt nose they made was for a right port ejection.I guess whoever test fires the guns,never looks at the primer strike,otherwise my gun should never have been shipped,the first time.