Of a complete, ready-to-go one, about 60.
Call sharpshooterssupply.com
What is the cost of a 223 long action bolt head ??
Of a complete, ready-to-go one, about 60.
Call sharpshooterssupply.com
Or, one of PTG's precision machined bolt heads for $49.50 bare.
http://shop.pacifictoolandgauge.com/...oducts_id=1291
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Still not sure if I will actually do this, but how about a magazine ??
Thats probably what I will do.
Is your long action a newer one or older?
(Does it have a flatback reciever or round.)
Older flatback
If you can do a bit of tin work, you can make a spacer for inside the mag box OR a longer rear tab for a short box and add the .223 bolt baffle with the leg to shorten the stroke.
I've added the legged front baffle and fixed a centerfeed 223 magazine into the mag well of a long action stock. It worked real well on an old flat back long action I had.
The only hard part was making a floor for the magazine that would fit in the mag well to keep the spring from pushing the mag out of the stock.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
Bookmarks