Ordered: 2 x Stevens 200's in .308 win. Should be here on Thursday.
Cost to date: $680.
Target: Former military sniper, and close friend of mine.
Objective: Make him cry as his wife thinks he will, and get both of us in to long range shooting. Also documenting here for anyone interested in a build thread.
Background: I was stuck in a pretty dead end career path that didn't pay very well. Because of my friend, I am now going in a completely different direction, in a field that will afford me a very comfortable life in the long run. It took a move to a new area to where neither of us have been all that long, but because of him I got hired on, and the job is going great. Due to his military background, .308 holds a very special place with him. He badly wants one, but it's just not in the cards due to having a large family. The best thing I can think of, to begin expressing my gratitude for what he has done for me, is to build him a tack driver in his beloved caliber.
Build Concept:
Base rifle: A pair of Stevens 200's in .308Barrels: Brand, length, and twist rate undecided as of yet.Bolt: Both will receive "Tactical" bolt handles. Likely from http://sharpshootersupply.com/Optics: SWFA SS 10x42, rear focus, Mil/Mil.Mounts: Undecided. Also need to figure out what height rings I am going to need.Triggers: Timney or Rifle Basix. Undecided as of yet.Stocks: Bell & Carlson Tactical Medalist. One in olive web, the other in tan web so that the rifles are not completely identical.Finish: Olive stock combined with a tan finish on the rest of the rifle, where the tan stock will get an olive drab finish on the rest of the rifle.Tools: Go/No go gauges, action wrench, barrel nut wrench.Extras if I can weasel it into my budget: drag bags, sun shades, Butler Creek flip up caps, Harris bipods, rear bags, ballistics cards, and as much match ammo as I can afford.
Running tally as built:
Base rifles: 2x Stevens 200's in .308 - $340 each - $680 total
Optics: SWFA SS 10x42, rear focus, Mil/Mil. x2 - $299.95 each, $599.90 total
Mounts: Weaver 30mm Tactical 6-Hole scope rings x2 from MidwayUSA. $38.49 each: $76.98 total
EGW Picatinny Rail 1 Piece Scope Mount x2 - $39.95 each. $79.90 total
Optics Accessories: Butler Creek Caps - $15.95 each, $31.90 total
Barrels: McGowan 24" Stainless Steel, Varmint Contour - $249.00 - Ordered from GunShack
Shilen Select Match Stainless Steel, Varmint Contour - $339.00 - Northland Shooter SupplyTriggers: Rifle Basix Sav-1 x 2 - $85.00 each, $170.00 total - Northland Shooter Supply
Barrel nuts: NSS Stainless Steel barrel nuts x 2 - $28.00 each, $56 total
Recoil Lugs: Savage Competition Recoil Lug x 2 - $25.00 each, $50 total - GunShack
Trigger Guards: Savage Trigger Guard, Steel Matte x 2 - $20.00 each, $40 total - GunShack
Bolt Handles: Savage Tactical Bolt Handle BT-Style (factory large bolt handle) x 2 - $27.00 each, $54.00 total - Tactical Works
Stocks: B&C Medalist Tactical, 1 in O.D. Green w/ black web, other in Black w/ grey web - $240.00 each, $480.00 total - Shooters Discount
Finish: Aluma-Hyde II in earth brown, and O.D. green - $12.99 each, $25.98 total - Brownells
Hearing protection: Howard Leight Impact Sport Electronic Earmuffs x 2 - $49.99 each, $99.98 total - Brownells
Rear bags: MidwayUSA Tactical Rear Shooting in O.D. green x 2 - $12.99 each, $25.98 total - Midway USA
Cases: MidwayUSA Sniper Drag Bag Scoped Rifle Gun Case 56" Nylon - Once in black, the other in coyote - $74.99 each, $149.98 total - Midway USA
Ammo (all is 20 round boxes, match grade. Each rifle comes with 100 rounds):
.308Win 175g SMK Premium - Loaded in new Lapua brass x 2 - $33.99 each, $67.98 total
.308Win 178g Amax x 2 - $23.99 each, $47.98 total
.308Win 168g Amax x 4 - $23.49 each, $93.96 total
Non match .308Win Ultramax 168g Boat Tail HP - sight in ammo only x 2 - $20.99 each, $41.98 total
Build costs:
McGowan build: $1,685.25
Shilen build: $1,775.25
Build total: $3,460.50
Tools (not included in build cost): Go/No gauges - $25.49 each, $50.98 total.
Barrel nut wrench - $25.49
Action wrench: $58.99
Extras (not included in build cost): EGW Replacement Torx Mount Screws (for Shilen setup only) - $5.00
Grand total: $3,600.96
My original budget was about $1,200 per rifle. Looks like I went a little over. Oops. :D
Last edited by broken6r; 01-26-2013 at 09:06 AM.
Ordered: 2 x Stevens 200's in .308 win. Should be here on Thursday.
Cost to date: $680.
Why only a 10x power scope?
Where the 20x is the same price.
Gotcha.
The newer stevens actions are very smooth.
Speaking of the newer Stevens action, anyone know if they're the round receiver or flat receiver? Trying to figure out what mounts I need.
http://swfa.com/Savage-C2594.aspx
Also, medium rings should be high enough for a SWFA SS, shouldn't they?
Looking at these http://swfa.com/Vortex-Tactical-30mm-Ring-P51756.aspx or these http://swfa.com/Weaver-Tactical-6-Ho...gs-P46491.aspx
Round.
Flat were the older ones.
And yes medium should be good.
Ordered: SWFA SS 10x42 x 2, and EGW 20 MOA base x2.
Cost of the above: $732.34 shipped
Cost to date: $1412.34
Credit card company is probably freaking out haha.
Your ring height may be determined by the diameter of the barrel at the reciever / barrel joint. I had all my scopes sitting within 1/4 inch of the barrel. When I started changing to fat barrels, I changed rings,too. I didn't have much choice.
Sporter barrel starts to taper right at the action.
Double check before you buy.
Good luck with your project(s).
Frank in Fla
'Scuse me while I whip this out...!
I fully expect a call from Visa about my check card this week. Last time I spent a ton of money in a short time, they called 3 or 4 times within a couple days to make sure it was all legit.
By the way, the Weaver 6 hole slots are all I use (4 hole on the 1 inch scope). I love those rings. I have never had a scope slip & they look really cool, too.
I'd say they have a cool factor of at least 8.
Back to making ammo.... Later.
Frank in Fla
'Scuse me while I whip this out...!
I would get a barrel vise instead of the action wrench- Go gague is a good thing, no-go not needed- save that $$$ for more ammo
Neither is needed. Pieces of tape work fine...
BillPA has a really good/cheap method for barrel changes......perhaps he will chime in here later.
I hate barrel wrenches.... Action wrench for me. Especially for those troublesome barrels where the threads are packed with little tiny pieces of steel shot from the bead blast or whatever textures the matte finishes.
'Scuse me while I whip this out...!
This is a very cool project. I'm sure the rifle is something he will always treasure, and his children will probably fight over some day.
You rang?
My tools are only cheap if your changing a couple barrels. If its a one and done deal your probably ahead dollar wise paying a smith. With that said, my factory barrel setup...
I lost count long ago how many factory installed barrels its defeated with little effort. In fact a local smith used to borrow it occasionally!
For swaps post factory barrels .......
A rear entry wrench and a open ended spanner. No need to remove the scope or mounts, pull one barrel and slap another on.
Bill
Last edited by BillPa; 12-08-2012 at 08:14 PM.
Bill,
I love your setup- especially the "post factory barrel" setup. I hate haffin to pull scopes for barrel swaps.
Bossman
Broken;
Where are you located? There is a good chance you're close enough to somebody who can help you with the barrel/stock swaps and finding a place to shoot LR.
Already ordered the tools so i'm good to go. As far as land to shoot on, i'm in a tiny town surrounded by prairie so it shouldn't be too hard. Also got a line on a local guy with a 1,000 yard range on his land he shoots open sights on. Rumor has it if I take him beer, I will likely get permission to use his personal range.
I have 6 SS scopes mounted, some with EGW bases and some with Burris XTR. I use the LOW rings for all, SS tactical or XTR tactical, 3 on bull barrels and 3 on varmint.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
Ordered: Weaver 30mm Tactical 6-Hole scope rings x2 from MidwayUSA. $38.49 each: $76.98 total
Ordered (not including in build price): Go/No Go gauges ($25.49 each), Barrel nut wrench ($25.49), action wrench ($58.99): $135.46
Cost to date, not including tools: $1489.32
For anyone still reading, I will also be updating my initial post with the running total and parts list as built, as well.
how about some pics ;-} it sounds like you and your buddy are going to have some fine shooters
Bookmarks