Results 1 to 3 of 3

Thread: Building a 7mm rem mag Please advise..

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #2
    stangfish
    Guest
    My thoughts;
    Detachable mag - nice but it's a luxury that is up to you and your tastes.
    Barrel contour/length - Magnum contour at 24 inches minimum and 26 if you're in a stand doing your hunting. Some would argue that you need a 26 to see the full potential of the 7 mag.
    Action - the stainless actions in the 114 or 116 line are desirable. Other than that and you have the ability to choose, any centerfeed action is GTG.
    Stock - If money is no object the M40A1 from McMillan is a good choice but the Bell and Carson stocks are good to go as well. The Boyds stock works with the 300 win mag and handles the recoil well. If this is a woods gun for stalking go with a synthetic type. If you are interested in a nice factory wood stock pm me for nfo.

    If your parts list comes in over 1200 look at this..........http://www.longrangehunting.com/foru...11-7rm-101791/


    These are just some suggestions based on my opinions. Your milage may vary.
    Last edited by stangfish; 11-19-2012 at 01:01 AM.

Similar Threads

  1. Building my first rifle. Need advise.
    By PepeLapiu in forum 110-Series Rifles
    Replies: 7
    Last Post: 03-21-2017, 03:25 PM
  2. Need some advise
    By bc160 in forum 110-Series Rifles
    Replies: 6
    Last Post: 04-24-2016, 11:17 PM
  3. New member looking for advise
    By 4IDARCHER in forum 110-Series Rifles
    Replies: 1
    Last Post: 01-31-2014, 02:50 PM
  4. New Here and need some advise
    By the bearhunter in forum 110-Series Rifles
    Replies: 16
    Last Post: 03-14-2010, 07:00 PM
  5. Anybody ever run into this, need some advise.
    By tammons in forum Ammunition & Reloading
    Replies: 4
    Last Post: 12-01-2009, 07:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •