Issue Resolved.
As i looked for information on this i found instructions showing a screw but it is not a screw. It's the spring that actually screws in and out to adjust the trigger. Thanks
I was wondering why my savage sear would engage the accu trigger when i closed the bolt and it turns out to be the adjustment screw for the accu trigger is mission. So there is little to no pressure on the trigger. Can i pickup a screw from the hardware store that will fit in place of the accu trigger adjustment screw and if so what size is it? Something like a socket head plug or do i need the original screw.
Issue Resolved.
As i looked for information on this i found instructions showing a screw but it is not a screw. It's the spring that actually screws in and out to adjust the trigger. Thanks
If you could post an annotated photo or drawing, it would help forum members find you the missing part.
Bookmarks