I am doing a tan stock w/ black spiderwebbing and have found some info on the final spraying of the spiderwebbing. I got an extra can of it coming so I can practice on cardboard, etc. Heres my question, for best results, should I apply the spiderwebbing paint to the base coat while the base coat is still slightly "tacky" or wait till dry? I assume before it sets up fully would be best. I also have a can of flat clear coat to protect it afterwords. Again, should I put that on when its all not fully set up or wait till dry. I am going to use this rifle and want it to stay on and not come off in little pieces!
Any advise?