Savage Model 11 .308 bolt sticking

[BillPa]

However, the ejector pin looks like it's not quite flush with the bolt face. I looked at a couple of spent cartridges and noticed a spot on most where the rear rim is marred, but I'm not sure if this is normal, or if it's the 90* rub mark you are referring to. I'll see if I can get some pictures to help explain more.

Rub marks from an ejector,if any, will be on the caliber stamping or very close to it and circular due to the bolt rotation, kind of like drawing with a compass. If you suspect the ejector may be the problem remove it and fire a few rounds and see the the hard lift disappears.

Bill