I only use one layer of tape when I reset the headspace on all barrels.... even factory.
two layers of scotch tape and bolt starts to cam over but won't close. little loose?
I only use one layer of tape when I reset the headspace on all barrels.... even factory.
MSG, US Army (R)/NRA F Class Match Director/NRA Certified Range Safety Officer
"The Nut behind the Butt is Responsible for the flight of the Bullet!"
the difference between a go and a no-go is .004", so measure the go gauge, then add tape until the go gauge measures .004" longer and you will be fine.
It really depends on the brand of tape. I have used some that needed 1 layer and some that have needed 2 layers.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
One piece of Scotch brand tape and GTG...
I couldn't remember if it was one or two layers of scotch brand tape. I'll measure it regardless.
thanx, Ted
Bookmarks