Ace - If you want to read about clean case necks, "cold weld" and such go to AccurateSHooter.com, go into the forum, into "Reloading" & use the search with the words "cold weld".
Several threads will come up with lots of info on the subject. For me, it helped cut down on flyers by better than 50%. A quick way to check if the bullet is sticking to the case neck wall - Take a few rounds that were made a few days ago. Place one in the press with your seater die & set the die for about .010" shorter than the bullet is. If, when you re-press / reseat the bullet it goes in with a very distinct "POP" sound, they're sticking.
Something as simple yet important at this made a major difference in the accuracy & consistancy of my home rolled ammo.
Good luck with it...
Frank in Fla
Reply With Quote
Bookmarks