Quote Originally Posted by Sv650s42701 View Post
Yes I am pulling the bolt all the way back the rounds just won't feed. It works great as a single shot but it won't feed the next round.
I would pull the rifle from the stock and make sure the magazine is still engaged in the front and rear slots in the bottom of the receiver. When my rifle fails to feed, that is usually the cause. It allows the mag to drop a tad, and the rim of the cartridge drops low enough that the bolt doesn't catch it. You will not be able to tell without pulling it out of the stock. I had to tweak my magazine a bit to make more pressure holding it in the slots. Recoil was popping it back out.

If it's still in there, make sure it's snug. Also, if neither of the above are true, the feed lips might have gotten bent? Maybe?

Good luck.