The bolt heads are different, you'll have to shorten the shank to make a LA work in the SA bolt. I think you'll also need a SA magnum firing pin assembly. They are different than the standard and 223 sized SA firing pin assemblies.
I was sure I was reading about this before but can't seem to find it.
Looking to put a 223 WSSM on a LH SA. I have a complete LH LA Mag bolt head but, haven't been able to locate a LH SA bolt head.
Any tricks for using a LA bolt head in a SA ??
Thanks guys.
Dave,
The bolt heads are different, you'll have to shorten the shank to make a LA work in the SA bolt. I think you'll also need a SA magnum firing pin assembly. They are different than the standard and 223 sized SA firing pin assemblies.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
So I need the bolt head and firing pin for a LH 16 WSM for my WSSM, correct ??
Last edited by shovelheadave; 09-04-2012 at 07:18 PM.
A LH WSM bolt head will only work if it is a newer push feed bolt head. A CRF bolt head won't work. You may have to order one from SSS or shorten the shank of a LH LA one.
Yes, on the firing pin. You'll need one from a WSM.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
thanks
Bookmarks