Hmmm, false alarm. I took the bolt apart and the internal pieces are fine. Working now after putting it back together.
Anyone know how the internals of the bolt lock up?
Any suggestions?
I have a Savage model 16 WSM with what seems to be a broken firing pin. Once I figure out how to get the bolt apart I will know what part I am after.
Where do I get internal bolt parts? (this one has the standing ejector)
It pierced a couple of primers and then stopped firing. The spring loaded cam over / rotating piece inside the bolt stops about half way down its travel and the firing pin does not come out.
Loads may have been a bit warm ...
Loving the Norma 270WSM brass.
What do you think?
Doug
Hmmm, false alarm. I took the bolt apart and the internal pieces are fine. Working now after putting it back together.
Anyone know how the internals of the bolt lock up?
If you blanked a few primers, the slug from the primer got caught up in the bolt head. That's why it stopped short.
"As long as there's lead in the air....there's still hope.."
Bookmarks