Originally Posted by
brtelec
I use a Lee collet sizing die for all my calibers with the exception of 338LM. If they do not offer the die in a standard size cartridge they will custom make them for you for $60-. I neck size until tight in the chamber then I use a Redding body bump die to bump the shoulder back slightly with out sizing the neck at the same time.
The subject of neck vs. full length resizing is one that there is no right answer to. Among the people in this industry that I respect, they are not in agreement on this subject, so I do what works for me. Between neck sizing and regular annealing the only thing that costs me my brass is loose primer pockets in the heavy magnums. I have .308 that have been loaded more than 30 times and still are none the worse for wear.
Members who have read this thread in the last 1 days: 0
Reply With Quote
Bookmarks