I put a little bit of play doh around it before applying my release agent.
I know this is a dumb question, BUT what do you do about this tiny hole/slit against the recoil lug?
I did not remember seeing it in the bedding articles, and it looks big enough for material to flow into.
[img width=301 height=450]http://burfordphotos.com/jonathan/IMAG0001.jpg[/img]
Thanks!
I put a little bit of play doh around it before applying my release agent.
Thanks!
I drip in hot candle wax & then trim smooth after it sets up.
Or a small piece of scotch tape.
Bookmarks