You will get a lot of answers telling you that this or that is best but the long and short of it is you can get cheap and good (Lee) or you can get very expensive and very good (more than one brand). It all boils down to what trips your trigger and what you can afford. The Lee factory crimp die will work very well for your garand. It seems to be a more consistent and forgiving crimp than the standard roll crimp built into most seating dies when set up properly. Looking at the calibers listed i would go Lee (if available) for hunting and if paper is competition i would look at some of the higher end seating dies but would not rule out the Lee dies for neck sizing only. The garand you are going to have to full length resize each time.
Bookmarks