I bedded the pillars last night. Tonight I dried fitted the barreled action to sit on the pillars. I wrapped masking tape around the barrel at the front to hold elevation and center in stock. I masked the stock and put clay where needed. I put 2 layers masking tape on front and sides of recoil lug. I waxed the action and barrel with neutal kiwi and buffed, filled voids and holes with clay and waxed and buffed again. Dry fitted one more time. Mixed 1/3 lb of Devcon 10110, put it on what seem to be very thick. Sat barreled action down into stock. (I bought some extra action screws a Westlakes and cut the head off, put three wraps of masking tape around them.) Devco oozed out every where I was expecting. Wrapped black tape securely around tang and stock. Ate supper and relaxed for 1 hour or so, went back down and cleaned up what had oozed out along action and in mag well. I used a plastic putty knive, q-tips, rags and wd-40. Now we wait.

How long should it cure before removing (I hope) from stock? Ron